VoiceTone Correct combines studio compression, tone shaping and de-essing with selectable pitch correction so you can deliver your best vocal performances. Have you ever noticed how as a singer, you seldom have control of the sound system and no sound engineer to help you get a great live vocal sound? Correct acts like an audio engineer does by reacting to your vocal sound and applying studio dynamics and EQ to bring out your best tone.
Now you can put a recorded gloss on your live singing without the setup and adjustment of complex equipment normally required to achieve “that sound”. An incredible amount of live sound research was undertaken in designing Correct so that you can trust it as your personal, capable and reliable sound engineer.
Compact pedal design allows you to take your “sound engineer” to performances.
Super-simple operation is designed to give you great vocal sound right now!
The Adaptive features for Compress and EQ assess your tone and gently adjust the amount of effect.
”Set and forget” center notches in the Compress, Shape and De-Ess controls define the most common effect settings so you don’t have to search for your sound.
Auto chromatic pitch correction requires no key or scale setting, in fact, the only correction controls are amount and on/off
Your pitch-corrected vocal can be sent to the house or only to the monitors as a guide
Two footswitches allow separate activation of pitch correction and the Live Engineer effects.
XLR mic input with phantom power and XLR output
Clean, low noise, studio quality mic preamp
Real-time Tuning Guide with Pitch Correction
The auto-chromatic pitch correction helps you sing more in tune, much like a metronome helps for playing in time. It's like singing with a singer who has perfect pitch. This lets you know when you're out of tune and you naturally decide to correct yourself, or not.
Auto Chromatic Pitch Correction
In the same way a metronome helps for playing in time or how singing along with a singer who has perfect pitch helps for singing in tune, the auto chromatic pitch correction in VoiceTone Correct can improve your pitch performance.
Setting up for pitch correction has never been easier. The typical adjustments of key, scale and attack time aren’t present because the chromatic scale works for all western scale-based songs and the rest of the parameters are pre-set. Just set the Correct control to the center detente, press the footswitch and it’s done.
You can choose to send your pitch corrected voice to the house, in which case it will gently adjust your pitch for the audience, or you can send your corrected voice only to the monitors to be used as your guide. The two output jacks make these configurations possible.
Adaptive Shape Control Fits Your Voice
More than the typical multiband EQ found in your average mixer, the Adaptive Shape feature seeks to provide a pleasant balance between low and high frequencies for your voice.
Self-Adjusting Adaptive Compression
Setting up a typical compressor can be cumbersome and time consuming. Setting Correct’s Adaptive Compression feature to the default positions allow it to analyse your performance and provide gentle-on-the-ears compression wherever you sing on your mic.
De-Ess Smoothes Sibilance
You probably didn’t think you needed this feature, but when you brighten up and compress your voice, S sounds typically jump out. At loud performance volumes, this can lead to discomfort for your audience. Correct’s De-Ess feature reduces the volume of only sibilant sounds while retaining the pleasant brightness on the rest of your singing.
Analog Inputs
Connectors
Balanced XLR
Input Impedance
1 kOhm
Mic Input Sensitivity @ 0 dBFS
-44 dBu to +2 dBu
Mic Input Sensitivity @ 12 dB headroom
-56 dBu to -10 dBu
EIN
-128 dBu @ max. mic amp gain, Rg = 150 Ohm
Analog Outputs
Connectors
Balanced XLR
Output Impedance
40 Ohm
Output Level @ 0dBFS
+2dBu
Input to Output Analog Audio Performance
Dynamic Range, Mic. @ Min gain
>108 dB, 20 Hz - 20 kHz (A-weighted)
Dynamic Range, Mic. @ -18dBu sensitivity
> 104dB, 20hz – 20kHz (A-weighted)
THD+ Noise, Mic. @ Min gain
<-90dB
Frequency Response, max gain
-1.5 dB @ 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
Conversion Characteristics
Sample Rate
48 kHz
Converter
AKM AK4620B
A to D / D to A Conversion
24 bit, 128x oversampling bitstream
A to D Delay
0.65 ms
D to A Delay
0.63 ms
EMC
Complies with
EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety
Certified to
IEC 65, EN 60065, UL6500 and CSA E60065 CSA FILE #LR108093
